Sailtel SFP-GE31-LX 1310nm duplex LC 1.25Gbps 10km SMF SFP optical module view 1
SFP-GE31-LX 1.25Gbps SFP Optical Transceiver, 1310nm, SMF, 10km, Duplex LC $11.99
Back to products
Sailtel SFP-10G23-BX10 10G BiDi optical SFP+ transceiver product view 1
SFP-10G23-BX10 10G BiDi SFP+ Transceiver, 1270nm TX / 1330nm RX, SMF, 10km $13.99
Sailtel SFP-GE-TM RJ-45 SGMII copper SFP module product view 1
Sailtel SFP-GE-TM RJ-45 SGMII copper SFP module product view 2
Sailtel SFP-GE-TM RJ-45 SGMII copper SFP module product view 3
Sailtel SFP-GE-TM RJ-45 SGMII copper SFP module product view 4
Sailtel SFP-GE-TM RJ-45 SGMII copper SFP module product view 1
Sailtel SFP-GE-TM RJ-45 SGMII copper SFP module product view 2
Sailtel SFP-GE-TM RJ-45 SGMII copper SFP module product view 3
Sailtel SFP-GE-TM RJ-45 SGMII copper SFP module product view 4

SFP-GE-TM 10/100/1000BASE-T Copper SFP Transceiver, RJ-45, 100m, SGMII

SKU: SFP-GE-TM
  • 10/100/1000Mbps copper Ethernet over RJ-45
  • Cat 5 or better cable up to 100m
  • SGMII host interface required
  • Hot-pluggable SFP; 0°C to +70°C

$13.99

200 in stock

$30 Flat-Rate Shipping · Free Shipping on Orders $299+ Details

200 in stock

Compare
Add to wishlist

Description

Product Overview

SFP-GE-TM is a hot-pluggable RJ-45 copper SFP transceiver for 10BASE-T, 100BASE-TX and 1000BASE-T links up to 100m over Cat 5 or better copper cabling. It requires an SGMII-compatible SFP host interface.

Connection & Selection Guide

Connection: SGMII-compatible SFP host → SFP-GE-TM → RJ-45 Cat 5 or better cable → 10/100/1000BASE-T Ethernet device.

Important: SGMII and SERDES host interfaces are not interchangeable. Verify host compatibility, supported speeds, vendor coding and module power before ordering. For a SERDES-only Gigabit host, consider the SFP-GE-TS model instead.

Technical Support & After-Sales

For module compatibility assistance, contact support@sailtel.com with the exact host switch model. See our Shipping & Returns policy.

Sailtel equipment testing and inspection work environment
Sailtel equipment testing and inspection environment

Technical Specifications

Overview

ModelSFP-GE-TM
Data Rates10/100/1000Mbps
Standards10BASE-T / 100BASE-TX / 1000BASE-T
Form FactorSFP
ConnectorRJ-45
Copper CableCat 5 or better
Maximum Distance100m
Host InterfaceSGMII required
Operating Case Temperature0°C to +70°C
Hot-PluggableYes

Datasheet & Downloads

Download Datasheet (PDF) ↗

Frequently Asked Questions

What is the maximum supported distance?

Up to 10km on suitable single-mode fiber, subject to the link budget and connector loss.

Which optical wavelength and connector does it use?

A nominal 1310nm optical wavelength and duplex LC interface.

Is the module compatible with multimode fiber?

This model is specified for single-mode fiber. Select an appropriate multimode transceiver if your installation uses MMF.

What speed does it support?

It is designed for 10GBASE-LR applications at a 10.3125Gbps line rate, not for 1G SFP operation.

Does it support DDM / DOM?

Yes. Digital diagnostic monitoring is supported when the host equipment exposes these readings.

Can I insert it while equipment is powered on?

Yes, in a compatible hot-pluggable SFP+ host. Follow your device manufacturer's procedures.

Will it work with any brand of switch?

Not automatically. Check the host brand, model, firmware and vendor coding requirements before ordering.

Customer Reviews

0 reviews
0
0
0
0
0

Reviews

Clear filters

There are no reviews yet.

Be the first to review “SFP-GE-TM 10/100/1000BASE-T Copper SFP Transceiver, RJ-45, 100m, SGMII”

Your email address will not be published. Required fields are marked *

1 2 3 4 5
1 2 3 4 5
1 2 3 4 5