SFP-10G23-BX10 10G BiDi SFP+ Transceiver, 1270nm TX / 1330nm RX, SMF, 10km
- 10Gbps-class SFP+ single-fiber BiDi optics
- 1270nm TX / 1330nm RX; compatible pairing required
- SMF up to 10km, single LC optical connection
- Supports DDM; standard case temperature 0°C to +70°C
$13.99
200 in stock
200 in stock
Description
Product Overview
SFP-10G23-BX10 is a hot-pluggable 10Gbps-class SFP+ single-fiber BiDi optical transceiver for single-mode fiber (SMF) links up to 10km. It transmits at 1270nm and receives at 1330nm using a single LC optical connection. Digital diagnostic monitoring (DDM) is supported.
Operating Modes & Applications
This illustration shows typical optical networking applications. Network speed, fiber cabling, module pairing and host compatibility must be verified for the specific transceiver.
Connection & Selection Guide
Matching remote module: Pair SFP-10G23-BX10 (1270nm TX / 1330nm RX) with SFP-10G32-BX10 (1330nm TX / 1270nm RX) at the other end of the same single-mode fiber strand. Never pair two identical TX/RX modules.
Application: Compatible 10G SFP+ equipment → matched BiDi module pair → single-strand SMF, up to 10km subject to optical link budget.
Ordering information: The original listing specifies SFP-10G23-BX10C with standard 0°C to +70°C operating case temperature. Confirm the exact equipment compatibility and version before purchase.
Technical Support & After-Sales
For compatible BiDi pair selection, send host equipment model and fiber connection details to support@sailtel.com. Read our Shipping & Returns policy for fulfillment information.
Technical Specifications
Overview
| Model | SFP-10G23-BX10 |
|---|---|
| Form Factor | SFP+ |
| Data Rate | Up to 10.7Gbps |
| Optical Type | Single-fiber BiDi |
| Transmit Wavelength | 1270nm |
| Receive Wavelength | 1330nm |
| Fiber Type | Single-mode fiber (SMF) |
| Connector | Single LC (simplex LC) |
| Maximum Distance | 10km |
| Complementary Pair | SFP-10G32-BX10 |
| DDM | Supported |
| Operating Temperature | 0°C to +70°C |
Datasheet & Downloads
Frequently Asked Questions
What is the maximum supported distance?
Up to 10km on suitable single-mode fiber, subject to the link budget and connector loss.
Which optical wavelength and connector does it use?
A nominal 1310nm optical wavelength and duplex LC interface.
Is the module compatible with multimode fiber?
This model is specified for single-mode fiber. Select an appropriate multimode transceiver if your installation uses MMF.
What speed does it support?
It is designed for 10GBASE-LR applications at a 10.3125Gbps line rate, not for 1G SFP operation.
Does it support DDM / DOM?
Yes. Digital diagnostic monitoring is supported when the host equipment exposes these readings.
Can I insert it while equipment is powered on?
Yes, in a compatible hot-pluggable SFP+ host. Follow your device manufacturer's procedures.
Will it work with any brand of switch?
Not automatically. Check the host brand, model, firmware and vendor coding requirements before ordering.
Reviews
Clear filtersThere are no reviews yet.