IES1110D-5T-P4 5-Port Gigabit Unmanaged Industrial PoE Switch, 4×PoE RJ45 + 1×Uplink
- 5 × Gigabit RJ45 ports: 4 IEEE 802.3af/at PoE+ downlinks + 1 Gigabit uplink
- Unmanaged industrial switch; DIN-rail / wall-mount aluminum enclosure
- 12–48V DC input; up to 30W per PoE port
- Total PoE budget: up to 120W at 48V, 90W at 24V, and 60W at 12V DC input
- -40°C to +80°C operating temperature (datasheet); external DC power supply sold separately
$71.99
200 in stock
200 in stock
Description
Product Overview
The Sailtel IES1110D-5T-P4 is a compact 5-port unmanaged Gigabit industrial Ethernet PoE switch with four PoE-designated RJ45 ports (Ports 1–4) and one Gigabit uplink. It is designed for networked devices such as IEEE 802.3af/at-compatible IP cameras, wireless access points, and IP phones.
The IES1110D-5T-P4 supports IEEE 802.3af/at PoE+ on RJ45 Ports 1–4, with up to 30W per port. It features a wide 12–48V DC power input. The specified total PoE budgets are up to 120W at 48V DC input, 90W at 24V DC, and 60W at 12V DC. An appropriate external power supply is required and sold separately.
Key Features
- Four PoE-designated 10/100/1000BASE-T RJ45 ports and one Gigabit RJ45 uplink
- Unmanaged Ethernet switching with auto MDI/MDI-X
- IEEE 802.3x flow control and IEEE 802.3az EEE listed in the source document
- IP40 aluminum enclosure, DIN-rail/wall installation
- Industrial rated -40°C to +80°C according to datasheet
- IEEE 802.3af/at PoE+ PSE on Ports 1–4, up to 30W per port.
- 12–48V DC input; total PoE budget up to 120W at 48V, 90W at 24V, and 60W at 12V.
Operating Modes & Applications
Typical applications include powering IEEE 802.3af/at-compatible IP cameras, wireless access points and other network devices. Ensure that the total connected load remains within the available PoE power budget for the selected DC input voltage.
Connection & Selection Guide
Topology: four PoE-designated RJ45 downlink ports (TP1–TP4) plus one non-PoE Ethernet uplink.
Power Input: 12–48V DC via terminal block.
PoE Output: IEEE 802.3af/at PoE+ on Ports 1–4, up to 30W per port.
PoE Power Budget: Up to 120W at 48V DC, 90W at 24V DC, and 60W at 12V DC input. Select an external power supply suitable for the intended load.
Power adapter: not included; sold separately.
Technical Support & After-Sales
For wiring, power supply selection, environmental specifications or availability, contact support@sailtel.com with the exact model number. Technical values are from the supplied V1.0 specification, May 2026; request applicable compliance documents before use in regulated projects.
See our Shipping, Returns & Refunds policy for delivery and after-sales conditions.
Technical Specifications
Overview
| Model | IES1110D-5T-P4 |
|---|---|
| Ethernet Ports | 5 × 10/100/1000BASE-T RJ45 |
| PoE-Designated Ports | 4 × RJ45 ports (TP1–TP4); 1 × non-PoE uplink |
| PoE Mode / Standard | IEEE 802.3af/at PoE+ PSE |
| PoE Power Output | Up to 30W per port (Ports 1–4) |
| Input Voltage | 12–48V DC |
| PoE Power Pin Assignment | 4/5 (+), 7/8 (-) |
| Management | Unmanaged (plug-and-play) |
| Ethernet Standards | IEEE 802.3 / 802.3u / 802.3ab / 802.3x / 802.3az |
| Mounting | DIN rail / wall mount |
| Operating Temperature | -40°C to +80°C (datasheet) |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 5–95% RH, non-condensing |
| Enclosure | IP40 aluminum housing |
| MTBF | >200,000 hours (datasheet claim) |
| DC Polarity Protection | Reverse-polarity protection |
| Power Supply Included | No — purchased separately |
| Switching Capacity | 10Gbps switch fabric (non-blocking); 20Gbps backplane bandwidth |
| Packet Buffer | 1Mbit |
| Maximum Packet Length | 10K bytes (datasheet) |
| MAC Table | 8K addresses |
| LED Indicators | Power / Link-Activity / PoE |
| Dimensions (W×D×H) | 95 × 70 × 30mm |
| Net Weight | 0.25kg |
| Power Consumption | <125W including PoE; <6W without PoE |
| PoE Power Budget | 120W @ 48V DC / 90W @ 24V DC / 60W @ 12V DC |
Datasheet & Downloads
Frequently Asked Questions
What is the maximum supported distance?
Up to 10km on suitable single-mode fiber, subject to the link budget and connector loss.
Which optical wavelength and connector does it use?
A nominal 1310nm optical wavelength and duplex LC interface.
Is the module compatible with multimode fiber?
This model is specified for single-mode fiber. Select an appropriate multimode transceiver if your installation uses MMF.
What speed does it support?
It is designed for 10GBASE-LR applications at a 10.3125Gbps line rate, not for 1G SFP operation.
Does it support DDM / DOM?
Yes. Digital diagnostic monitoring is supported when the host equipment exposes these readings.
Can I insert it while equipment is powered on?
Yes, in a compatible hot-pluggable SFP+ host. Follow your device manufacturer's procedures.
Will it work with any brand of switch?
Not automatically. Check the host brand, model, firmware and vendor coding requirements before ordering.
Reviews
Clear filtersThere are no reviews yet.