IES1110D-5T 5-Port Gigabit Unmanaged Industrial Ethernet Switch, 5×RJ45, DIN Rail
- 5 × 10/100/1000Mbps RJ45 Ethernet ports; unmanaged
- 10Gbps switch fabric, 8K MAC address table
- 12–48V DC input; under 6W power consumption
- -40°C to +80°C operating temperature; IP40 aluminum enclosure
- DIN rail or wall-mount installation; power adapter sold separately
$41.99
200 in stock
200 in stock
Description
Product Overview
The Sailtel IES1110D-5T is a compact unmanaged 5-port Gigabit industrial Ethernet switch with five 10/100/1000BASE-T RJ45 copper interfaces and automatic MDI/MDI-X support. It is designed for industrial control cabinets and wired Ethernet applications where a small fanless switch and DIN-rail mounting are preferred.
The supplied V1.0 datasheet specifies 12–48V DC input, 10Gbps non-blocking switching fabric, an IP40 aluminum enclosure and an operating temperature range of -40°C to +80°C. The switch does not specify PoE power output.
Key Features
- 5 auto-negotiating Gigabit RJ45 ports with Auto MDI/MDI-X
- 10Mbps and 100Mbps half/full duplex; 1000Mbps full duplex
- 10Gbps switching fabric; 8K MAC address table; 1Mbit packet buffer
- IEEE 802.3x flow control and IEEE 802.3az energy-efficient Ethernet
- 12–48V DC input via terminal block; consumption under 6W
- Rugged IP40 aluminum case; DIN-rail or wall installation
- Industrial temperature range of -40°C to +80°C (datasheet)
Operating Modes & Applications
Use as a compact Gigabit copper Ethernet access switch in industrial control cabinets, building automation networks, monitoring systems or other installations that require wired network connectivity without management configuration.
Note: This model provides Ethernet data connectivity only. It does not supply power to devices over Ethernet; use an appropriate external PoE device if endpoint power is required.
Connection & Selection Guide
Ports: five 10/100/1000BASE-T RJ45 interfaces; no SFP slots are specified.
Power: connect a suitable 12–48V DC supply to the terminal block. The supply is sold separately. Confirm voltage, wiring polarity and installation requirements before energizing the device.
Installation: supplied with a DIN-rail bracket; the datasheet lists a wall-mount bracket as included.
Technical Support & After-Sales
For wiring, power supply selection, environmental specifications or availability, contact support@sailtel.com with the exact model number. Technical values are from the supplied V1.0 specification, May 2026; request applicable compliance documents before use in regulated projects.
See our Shipping, Returns & Refunds policy for delivery and after-sales conditions.
Technical Specifications
Overview
| Model | IES1110D-5T |
|---|---|
| Ethernet Ports | 5 × 10/100/1000BASE-T RJ45 |
| PoE | Not specified / non-PoE model |
| Management | Unmanaged (plug-and-play) |
| Ethernet Standards | IEEE 802.3 / 802.3u / 802.3ab / 802.3x / 802.3az |
| Mounting | DIN rail / wall mount |
| Operating Temperature | -40°C to +80°C (datasheet) |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 5–95% RH, non-condensing |
| Enclosure | IP40 aluminum housing |
| MTBF | >200,000 hours (datasheet claim) |
| DC Polarity Protection | Reverse-polarity protection |
| Power Supply Included | No — purchased separately |
| Input Voltage | 12–48V DC, terminal block |
| Power Consumption | <6W |
| Switching Capacity | 10Gbps, non-blocking |
| Forwarding Rate | 14.88Mpps listed in source specification |
| Packet Buffer | 1Mbit |
| Maximum Packet Length | 10K bytes (datasheet) |
| MAC Table | 8K addresses |
| LED Indicators | Power / Link-Activity / Speed |
| Dimensions (W×D×H) | 95 × 70 × 29mm |
| Net Weight | 0.25kg |
Datasheet & Downloads
Frequently Asked Questions
What is the maximum supported distance?
Up to 10km on suitable single-mode fiber, subject to the link budget and connector loss.
Which optical wavelength and connector does it use?
A nominal 1310nm optical wavelength and duplex LC interface.
Is the module compatible with multimode fiber?
This model is specified for single-mode fiber. Select an appropriate multimode transceiver if your installation uses MMF.
What speed does it support?
It is designed for 10GBASE-LR applications at a 10.3125Gbps line rate, not for 1G SFP operation.
Does it support DDM / DOM?
Yes. Digital diagnostic monitoring is supported when the host equipment exposes these readings.
Can I insert it while equipment is powered on?
Yes, in a compatible hot-pluggable SFP+ host. Follow your device manufacturer's procedures.
Will it work with any brand of switch?
Not automatically. Check the host brand, model, firmware and vendor coding requirements before ordering.
Reviews
Clear filtersThere are no reviews yet.