IES1110D-10T 10-Port Gigabit Unmanaged Industrial Ethernet Switch, 10×RJ45, DIN Rail
- 10 × 10/100/1000Mbps RJ45 copper Ethernet ports
- 20Gbps non-blocking switching fabric; 2Mbit packet buffer
- 12–48V DC redundant input; under 10W consumption
- -40°C to +80°C operating temperature; IP40 enclosure
- DIN-rail or wall-mount installation; power supply sold separately
$89.99
200 in stock
200 in stock
Description
Product Overview
The Sailtel IES1110D-10T is a compact unmanaged 10-port Gigabit industrial Ethernet switch with ten auto MDI/MDI-X RJ45 interfaces. It is designed for industrial networking applications that need more copper Ethernet ports without managed-switch configuration.
The supplied V1.0 specification lists a 20Gbps non-blocking switch fabric, 2Mbit packet buffer, 12–48V DC redundant power input, IP40 aluminum housing and -40°C to +80°C operation. No PoE power output or SFP uplink is specified.
Key Features
- Ten auto-negotiating 10/100/1000BASE-T RJ45 ports
- 20Gbps non-blocking switching fabric with 14.88Mpps rated forwarding in source datasheet
- 2Mbit packet buffer, 4K MAC addresses and 9216-byte maximum frame length
- IEEE 802.3x flow control and IEEE 802.3az EEE
- 12–48V DC redundant input; consumption under 10W
- IP40 aluminum enclosure, DIN rail and wall mount
- Wide operating temperature range of -40°C to +80°C (datasheet)
Operating Modes & Applications
Suitable for compact industrial Gigabit Ethernet aggregation, control-system communication, wired equipment connections and distributed access networks where ten copper RJ45 ports are required.
Note: This is a data-only Ethernet switch in the supplied specification. Network cameras or other PoE-powered peripherals require a separate, compatible PoE power source.
Connection & Selection Guide
Ports: ten Gigabit RJ45 copper Ethernet ports, with no SFP optical slots specified.
DC input: redundant 12–48V DC input with polarity protection according to the supplied datasheet; confirm the terminal connection and external supply before commissioning.
Installation: supplied with DIN-rail bracket; wall-mount bracket is listed as included. Power supply is purchased separately.
Technical Support & After-Sales
For wiring, power supply selection, environmental specifications or availability, contact support@sailtel.com with the exact model number. Technical values are from the supplied V1.0 specification, May 2026; request applicable compliance documents before use in regulated projects.
See our Shipping, Returns & Refunds policy for delivery and after-sales conditions.
Technical Specifications
Overview
| Model | IES1110D-10T |
|---|---|
| Ethernet Ports | 10 × 10/100/1000BASE-T RJ45 |
| PoE | Not specified / non-PoE model |
| Management | Unmanaged (plug-and-play) |
| Ethernet Standards | IEEE 802.3 / 802.3u / 802.3ab / 802.3x / 802.3az |
| Mounting | DIN rail / wall mount |
| Operating Temperature | -40°C to +80°C (datasheet) |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 5–95% RH, non-condensing |
| Enclosure | IP40 aluminum housing |
| MTBF | >200,000 hours (datasheet claim) |
| DC Polarity Protection | Reverse-polarity protection |
| Power Supply Included | No — purchased separately |
| Input Voltage | 12–48V DC, redundant input with polarity protection |
| Power Consumption | <10W |
| Switching Capacity | 20Gbps, non-blocking |
| Forwarding Rate | 14.88Mpps at 64-byte packets (datasheet) |
| Packet Buffer | 2Mbit |
| Maximum Packet Length | 9216 bytes |
| MAC Table | 4K addresses |
| LED Indicators | Power / Link-Activity / Speed |
| Dimensions (W×D×H) | 95 × 88 × 46mm |
| Net Weight | 0.30kg |
Datasheet & Downloads
Frequently Asked Questions
What is the maximum supported distance?
Up to 10km on suitable single-mode fiber, subject to the link budget and connector loss.
Which optical wavelength and connector does it use?
A nominal 1310nm optical wavelength and duplex LC interface.
Is the module compatible with multimode fiber?
This model is specified for single-mode fiber. Select an appropriate multimode transceiver if your installation uses MMF.
What speed does it support?
It is designed for 10GBASE-LR applications at a 10.3125Gbps line rate, not for 1G SFP operation.
Does it support DDM / DOM?
Yes. Digital diagnostic monitoring is supported when the host equipment exposes these readings.
Can I insert it while equipment is powered on?
Yes, in a compatible hot-pluggable SFP+ host. Follow your device manufacturer's procedures.
Will it work with any brand of switch?
Not automatically. Check the host brand, model, firmware and vendor coding requirements before ordering.
Reviews
Clear filtersThere are no reviews yet.