SFP-GE-TS 1000BASE-T Copper SFP Transceiver, RJ-45, 100m, SERDES
- 1000BASE-T Gigabit Ethernet
- RJ-45 connection, up to 100m over Cat 5 UTP
- Hot-pluggable SFP form factor
- Operating case temperature: 0°C to +70°C
Host requirement: Compatible SERDES SFP port with copper-module support.
$13.99
200 in stock
200 in stock
Description
Product Overview
SFP-GE-TS is a 1000BASE-T copper SFP transceiver for Gigabit Ethernet connections up to 100m over Cat 5 UTP cabling. Its RJ-45 interface connects a compatible SERDES-based SFP host to an RJ-45 Gigabit Ethernet device.
Use it for copper uplinks and equipment connections where an existing SFP port explicitly supports this module type.
Connection & Selection Guide
Connection: Compatible SERDES SFP host → SFP-GE-TS → RJ-45 Cat 5 UTP cable → Gigabit Ethernet device; up to 100m.
Before ordering: Confirm support for 1000BASE-T copper SFP operation and the SERDES host interface. A physical SFP slot alone does not guarantee compatibility. Contact support@sailtel.com with your device brand and model if you need assistance.
Technical Support & After-Sales
For product documentation, compatibility checks or after-sales assistance, contact support@sailtel.com with the product model and, where applicable, your order number.
See our Shipping, Returns & Refunds policy for delivery, returns, exchanges and warranty service conditions.
Technical Specifications
Overview
| Model | SFP-GE-TS |
|---|---|
| Ethernet Standard | 1000BASE-T |
| Data Rate | 1000Mbps |
| Form Factor | SFP |
| Connector | RJ-45 |
| Cable Type | Cat 5 UTP |
| Maximum Reach | 100m |
| Host Interface | SERDES |
| DDM / DOM | No (copper module) |
| Operating Case Temperature | 0°C to +70°C |
| Hot-Pluggable | Yes |
| Management Interface | 2-wire serial interface |
Datasheet & Downloads
Frequently Asked Questions
What is the maximum supported distance?
Up to 10km on suitable single-mode fiber, subject to the link budget and connector loss.
Which optical wavelength and connector does it use?
A nominal 1310nm optical wavelength and duplex LC interface.
Is the module compatible with multimode fiber?
This model is specified for single-mode fiber. Select an appropriate multimode transceiver if your installation uses MMF.
What speed does it support?
It is designed for 10GBASE-LR applications at a 10.3125Gbps line rate, not for 1G SFP operation.
Does it support DDM / DOM?
Yes. Digital diagnostic monitoring is supported when the host equipment exposes these readings.
Can I insert it while equipment is powered on?
Yes, in a compatible hot-pluggable SFP+ host. Follow your device manufacturer's procedures.
Will it work with any brand of switch?
Not automatically. Check the host brand, model, firmware and vendor coding requirements before ordering.
Reviews
Clear filtersThere are no reviews yet.