SFP-GE53-BX10 1.25Gbps BiDi SFP Optical Transceiver, 1550nm TX / 1310nm RX, SMF, 10km
- 1.25Gbps-class single-fiber Gigabit optical SFP
- 1550nm TX / 1310nm RX, SMF up to 10km
- Single LC BiDi connection; match with SFP-GE35-BX10
- Digital diagnostics, standard 0°C to +70°C
$10.00
200 in stock
200 in stock
Description
Product Overview
SFP-GE53-BX10 is a 1.25Gbps-class hot-pluggable SFP single-fiber BiDi optical transceiver for Gigabit Ethernet and compatible single-mode fiber links up to 10km. The module transmits at 1550nm, receives at 1310nm and supports digital diagnostic monitoring (DDM).
Operating Modes & Applications
This illustration shows typical optical networking applications. Network speed, fiber cabling, module pairing and host compatibility must be verified for the specific transceiver.
Connection & Selection Guide
Required matching BiDi module: Use SFP-GE53-BX10 (1550nm TX / 1310nm RX) with complementary model SFP-GE35-BX10 (1310nm TX / 1550nm RX) at the opposite end of the same fiber strand.
Single-strand optical link: Compatible Gigabit SFP equipment → BiDi module → single-mode fiber → complementary BiDi module → remote Gigabit SFP host. Never pair two identical TX/RX wavelength variants. Check link budget, interface support, manufacturer coding and installation details.
Ordering information: The original listing specifies SFP-GE53-BX10C for 0°C to +70°C. Confirm exact variant and connector details before ordering.
Technical Support & After-Sales
For correct A/B matching, send the host model and remote wavelength to support@sailtel.com. Review our Shipping & Returns policy.
Technical Specifications
Overview
| Model | SFP-GE53-BX10 |
|---|---|
| Data Rate | Up to 1.25Gbps |
| Form Factor | SFP |
| Optical Type | Single-fiber BiDi |
| Transmit Wavelength | 1550nm |
| Receive Wavelength | 1310nm |
| Compatible Peer | SFP-GE35-BX10 |
| Fiber | Single-mode (SMF) |
| Connector | Single LC (simplex LC) |
| Maximum Reach | 10km |
| Digital Diagnostics | DDM supported |
| Operating Case Temperature | 0°C to +70°C |
| Supply Voltage | +3.3V |
| Hot-pluggable | Yes |
Datasheet & Downloads
Frequently Asked Questions
What is the maximum supported distance?
Up to 10km on suitable single-mode fiber, subject to the link budget and connector loss.
Which optical wavelength and connector does it use?
A nominal 1310nm optical wavelength and duplex LC interface.
Is the module compatible with multimode fiber?
This model is specified for single-mode fiber. Select an appropriate multimode transceiver if your installation uses MMF.
What speed does it support?
It is designed for 10GBASE-LR applications at a 10.3125Gbps line rate, not for 1G SFP operation.
Does it support DDM / DOM?
Yes. Digital diagnostic monitoring is supported when the host equipment exposes these readings.
Can I insert it while equipment is powered on?
Yes, in a compatible hot-pluggable SFP+ host. Follow your device manufacturer's procedures.
Will it work with any brand of switch?
Not automatically. Check the host brand, model, firmware and vendor coding requirements before ordering.
Reviews
Clear filtersThere are no reviews yet.